Glass Ceramics Of High Performance Light Industrial Development Has Begun

Guangdong Monalisa Ceramic Co., Ltd. and Guangdong Keda Electric Co., Ltd., in cooperation Keda Electrical Engineering Test Center ceramic mass production large format ceramic tiles, marking China's large-size semi-dry Pressing ceramic sheet technology to promote the industrialization of the prologue has been opened!

    The two companies co-production of two specifications of six varieties of large format ceramic tiles, ceramic in Keda Electrical Engineering Test Center of the pilot production line for the 800m2/22 hours per day, quality product rate of 95%. Ceramic Engineering Test Center, according to the technical person in charge of Kodak MODULO6800 press with wide-body roller kiln can reach 4000 ~ 5000m2/22 hours per day, fully equipped with industrial production conditions.

    The traditional production process and equipment constraints, the gradual increase along with product specifications, the thickness of ceramic green body products have increased, large size ceramic tile "thin" problem has failed to break the technical bottlenecks. Other wall floor decorative materials such as marble, granite and other related issues more visible.

    Ordinary large-sized ceramic, stone and other natural building and decorating materials, while enhancing the decorative grade, but to bring the resource consumption, low utilization rate of energy waste and construction load heavy, high transportation costs, higher construction costs of a range of issues , and the lack of resources of national conditions in China have irreconcilable contradictions.

    Keda Electrical and first start in the domestic production of large-size ceramic plate R & D, and in May 2006 at the Kodak ceramic testing center using new techniques, new equipment, the successful production of 800 × 1800 × 5mm of the large size ceramic plate. At present, the minimum thickness can be controlled within 3 mm. Promote the industrialization of the conditions are basically ripe.

    Keda Electrical and promotion of large-size ceramic plate production line is equipped with dual-piston MODUL6800 large tonnage press, "'Magic' feeding system," energy efficient roller kiln, Nano ultra-clean bright polishing the world's advanced production lines and other equipment, in support unique process recipe can produce 1000 × 2000 × 3mm large format ceramic tiles, water absorption of less than 0.2%, modulus of rupture is greater than 46N/mm2, Mohs hardness greater than 7, greater than 90 degrees polished finish .

    Preparation Section of the production line and the same traditional process, "'Magic' feeding system" allows unlimited, multi-thickness of fabric, both for color fabrics, but also realize the multi-color, pre-pattern fabric; MODUL6800 dual piston large tonnage press for the large size ceramic sheet to provide a strong pressing force; energy efficient kiln through a special drive design, effectively avoiding the deformation of brick in the pottery; Nano ultra-clean bright finish line for the large-size ceramic sheet to provide the final product protection, but also through the polishing process can not directly produce large-size high-grade matte ceramic plate. Mona Lisa with the subjects in Electrical Ceramics Co., Ltd. co-production is that this large-size high-grade matte ceramic plate.

    The production line can produce not only large-size ceramic plate, it can produce 1000 × 1000 × 15mm size or 3mm ~ 15mm thickness of conventional products. Keda Electrical and promotion of large-size ceramic plate production line, for the ceramic enterprises with a flexible production model for ceramic decoration industry, business take-off and building a revolutionary platform that provides advanced, for the ceramic industry to achieve saving, clean technology, can Green economic production model cycle basis.

About The Author I am an expert from China Manufacturers, usually analyzes all kind of industries situation, such as budweiser signs , beer signs lighted.